how to skateboard for beginners
About This Video [how to skateboard for beginners]
Need More Help? Go to: http://www.secretsofskateboarding.com/
Skateboard trick tip video
About This Video [Skateboard trick tip video]
http://www.BrettNovak.com
World's Largest Skateboard Ramp
About This Video [World's Largest Skateboard Ramp]
Champion skateboarder Bob Burnquist is taking extreme skateboarding to a new level on the Mega Ramp in his backyard. (Producers: Emily B. Hager and Peter Rader)
Protective Gear For Caster Boarding
Protective Gear For Caster Boarding
By Tom Cruz
Whether you are riding a skateboard or a caster board such as the Ripstik it is important that you also where the right kind of gear in order to protect yourself from any dangers. In this article we will be taking a closer look at the kind of protective gear you should consider purchasing when you buy either a Ripstik Caster Board or a skateboard either for yourself or for someone else.
1. Helmet
When riding any kind of board it is important that you purchase a good quality helmet that is going to protect your head. As you start to learn to ride your board and also learn new tricks you will find that you will often spend quite a considerable amount of time falling off of it. In fact if you are not wearing the right kind of helmet and you come off you may actually cause yourself quite a serious head injury. Currently you will find in the USA that they do not have any specific regulations in place that manufacturers of such helmets are required to meet. However they can if they wish produce a helmet which meets ASTM certification, but this is not mandatory and it is completely up to the manufacturer whether they wish to attain this certification or not.
Probably the best types of helmets to purchase today are the ones that are made either by Bell, ProTec, SixSixOne or Giro. These are not only established companies but they also have the right resources for being able to design and provide the wearer with a warranty with their helmets. If you can purchase one which comes with the ASTM F-1492 certification label inside. Also it is important that you one you do choose fits well and feels comfortable when being worn just how good it looks should be your final consideration.
2. Knee and Elbow Pads
Although you may think that you look extremely silly with these on. As you will seen when watching extreme sport events on TV today all the top professionals will not only be wearing a good helmet, but a good set of knee and elbow pads as well. Not only will they protect these parts of your body when you fall to the ground (the impact can sometimes be quite hard depending on the surface you fall on to), but they can also to help you from getting nasty cuts or abrasions on your body as you slide on a rough surface. The most inexpensive way to get hold of a set of the above is buying a combination pack.
Above we have looked at the two most important pieces of protective gear a person should consider purchasing when they are buying either a Ripstik Caster Board or a skateboard. But there are other pieces of protective gear that they may want to consider buying also including wrist guards and shin and ankle guards.
To find out more about the Ripstik caster board visit www.ripstikreview.com
Article Source: http://EzineArticles.com/?expert=Tom_Cruz
By Tom Cruz
Whether you are riding a skateboard or a caster board such as the Ripstik it is important that you also where the right kind of gear in order to protect yourself from any dangers. In this article we will be taking a closer look at the kind of protective gear you should consider purchasing when you buy either a Ripstik Caster Board or a skateboard either for yourself or for someone else.
1. Helmet
When riding any kind of board it is important that you purchase a good quality helmet that is going to protect your head. As you start to learn to ride your board and also learn new tricks you will find that you will often spend quite a considerable amount of time falling off of it. In fact if you are not wearing the right kind of helmet and you come off you may actually cause yourself quite a serious head injury. Currently you will find in the USA that they do not have any specific regulations in place that manufacturers of such helmets are required to meet. However they can if they wish produce a helmet which meets ASTM certification, but this is not mandatory and it is completely up to the manufacturer whether they wish to attain this certification or not.
Probably the best types of helmets to purchase today are the ones that are made either by Bell, ProTec, SixSixOne or Giro. These are not only established companies but they also have the right resources for being able to design and provide the wearer with a warranty with their helmets. If you can purchase one which comes with the ASTM F-1492 certification label inside. Also it is important that you one you do choose fits well and feels comfortable when being worn just how good it looks should be your final consideration.
2. Knee and Elbow Pads
Although you may think that you look extremely silly with these on. As you will seen when watching extreme sport events on TV today all the top professionals will not only be wearing a good helmet, but a good set of knee and elbow pads as well. Not only will they protect these parts of your body when you fall to the ground (the impact can sometimes be quite hard depending on the surface you fall on to), but they can also to help you from getting nasty cuts or abrasions on your body as you slide on a rough surface. The most inexpensive way to get hold of a set of the above is buying a combination pack.
Above we have looked at the two most important pieces of protective gear a person should consider purchasing when they are buying either a Ripstik Caster Board or a skateboard. But there are other pieces of protective gear that they may want to consider buying also including wrist guards and shin and ankle guards.
To find out more about the Ripstik caster board visit www.ripstikreview.com
Article Source: http://EzineArticles.com/?expert=Tom_Cruz
Ripstick Caster Board - A New Twist In Boarding
Ripstick Caster Board - A New Twist In Boarding
By Jack Prime
The Ripstick Caster Board has been likened to surfing and snowboarding on two wheels!
Designed with two foot plates joined by a lateral pivot mechanism which allows them to twist independently, the Ripstick has 2 caster wheels, not unlike supermarket trolley wheels, allowing them to rotate in any direction.
These foot plates and wheels allow the Ripstick to provide a side sliding and turning motion just like carving on a snowboard.
The Ripstick can also be propelled by the side to side movement of the legs, meaning the rider does not need to take their foot off of the board to push it along, and it can be easily propelled along - even up hills.
The Ripstick can be used to do many of the normal skate boarding tricks but is uniquely capable of its own stunts due to its increased mobility.
The Ripstick boards typically come in 4 colours (Black, Blue, Green and Red) and are provided with a carry case, carry strap and toolkit.
A 4 wheel version is available for younger riders or those who find the 2 wheel ripstick difficult to balance. The 4 wheel version also includes LCD lights in the wheels for a really impressive ride!
Ripstick boards are very safe, as the intrinsic dynamics of the rotating casters don't have the skateboard's tendency to flick out from underneath the rider and the board tilts to the ground when it stops.
Of course with any boarding there is an element of skill involved and beginners are advised to wear appropriate clothing, helmet and pads as appropriate.
If you are looking for a new challenge or fancy a change from the traditional skateboard, take a look at the Ripstick and start surfing the street!
The Ripstick Caster Board is the latest boarding craze and more can be found at the Ripstick website.
Article Source: http://EzineArticles.com/?expert=Jack_Prime
By Jack Prime
The Ripstick Caster Board has been likened to surfing and snowboarding on two wheels!
Designed with two foot plates joined by a lateral pivot mechanism which allows them to twist independently, the Ripstick has 2 caster wheels, not unlike supermarket trolley wheels, allowing them to rotate in any direction.
These foot plates and wheels allow the Ripstick to provide a side sliding and turning motion just like carving on a snowboard.
The Ripstick can also be propelled by the side to side movement of the legs, meaning the rider does not need to take their foot off of the board to push it along, and it can be easily propelled along - even up hills.
The Ripstick can be used to do many of the normal skate boarding tricks but is uniquely capable of its own stunts due to its increased mobility.
The Ripstick boards typically come in 4 colours (Black, Blue, Green and Red) and are provided with a carry case, carry strap and toolkit.
A 4 wheel version is available for younger riders or those who find the 2 wheel ripstick difficult to balance. The 4 wheel version also includes LCD lights in the wheels for a really impressive ride!
Ripstick boards are very safe, as the intrinsic dynamics of the rotating casters don't have the skateboard's tendency to flick out from underneath the rider and the board tilts to the ground when it stops.
Of course with any boarding there is an element of skill involved and beginners are advised to wear appropriate clothing, helmet and pads as appropriate.
If you are looking for a new challenge or fancy a change from the traditional skateboard, take a look at the Ripstick and start surfing the street!
The Ripstick Caster Board is the latest boarding craze and more can be found at the Ripstick website.
Article Source: http://EzineArticles.com/?expert=Jack_Prime
FreshPark Professional Launch / Kicker Ramp - Designed to Grind - Built to Last - BMX and Skateboarding
FreshPark Professional Launch / Kicker Ramp - Designed to Grind - Built to Last - BMX and Skateboarding
From FreshPark
Product Details
Color: Tan/Black
Brand: FreshPark
Model: FP303
Released on: 2007-03-28
Features
- Foldable and portable; features a durable steel frame
- Weatherproof Urethane/ABS surface- requires no treatment and will not rot or warp like wood
- Modular and interlocking; attach to other Freshpark ramps and rails
- Used in the interactive villages of top pro skate tours: X Games, AST Dew Tour, Etnies GvR
- Maximum weight: 500 pounds; 90-day limited warranty
Buy FreshPark Professional Launch / Kicker Ramp Now
More info
Buy Ripstik Caster Board
Ripstik Caster Board
From Ripstik
Product Description
The new Ripstick combines all the fun and excitement of surfing and snowboarding and puts it on wheels. Inspired by the classic shape and design of a skateboard, the Ripstick looks like something out of the future. Instead of the traditional four-wheel skateboard, this amazing board can make smooth, quick 360-degree turns on just two wheels. Just stand on the sturdy traction plates and subtle movements propel the Ripstick even up a hill! The front and rear flexible panels are controlled by a spring-oriented bar located on the top of the wheels. The rugged polyurethane wheels are 77mm/85A with ABEC-5 bearings. Separating the two traction plates is a padded rubber carrying handle. Measures 33.5" long x 10" wide. Weighs 8 lbs. Wear helmet and pads for safety. 90-day warranty.
Product Details
Brand: Ripstik
Dimensions: 8.00 pounds
Features
- Groundbreaking caster board that acts like a skateboard/snowboard hybrid
- Pivoting deck and 360-degree caster trucks enable snowboard-like carving
- Spiked traction pads, kick tail and nose, and concave deck design
- 76mm polyurethane wheels and precision ABEC-5 bearing casters; Value Pack includes two extra wheels
- Designed for riders age 8 years and up; supports up to 220 pounds
Buy Ripstik Caster Board Now
More info
Element in the Air - Element Skateboard Decks
Element in the Air - Element Skateboard Decks
By Chris Dreyer
Skateboarding: How did it come to be? It actually came in existence in the 1950s when a group of surfers wanted to recreate the feeling of surfing a wave by surfing on land. They took flat wooden planks and attached roller-skate wheels underneath and went "Sidewalk Surfing". Between the 1950s through the 1980s, skateboarding had faded into the shadows but the lifestyle was brought back into limelight with skating legends such as Tony Hawk, Rodney Mullen, and Bam Margera (to name a few) who make skateboarding a way of life.
According to professional skateboarder Bam Margera, you have to "do what you do, have fun doing it, and try not to be too miserable." That is his philosophy on living life while skateboarding to new heights. Margera skates for Team Element. This skateboard company is based in California. They design the most radical skateboard decks offered to those who want to ride the air. Element skateboard decks are one of the best in the industry and have awesome board quality. There are four different types of constructions for Element skateboard decks: Helium, Fiberlight, Featherlight, and Thriftwood. No matter which construction you choose, you are going to get a great element skateboard deck with awesome graphic designs.
Once you have the perfect skateboard deck and wheels, you are ready to trick and ride some air. Try out an ollie, a pop shove-it, a crooked grind, nose slide, possibly a nose pick? If you are new to skating it might just be best to bomb a hill. But be warned: you might bail.
Click on the resource below for more information.
http://www.squidoo.com/element_skateboard_decks
Article Source: http://EzineArticles.com/?expert=Chris_Dreyer
By Chris Dreyer
Skateboarding: How did it come to be? It actually came in existence in the 1950s when a group of surfers wanted to recreate the feeling of surfing a wave by surfing on land. They took flat wooden planks and attached roller-skate wheels underneath and went "Sidewalk Surfing". Between the 1950s through the 1980s, skateboarding had faded into the shadows but the lifestyle was brought back into limelight with skating legends such as Tony Hawk, Rodney Mullen, and Bam Margera (to name a few) who make skateboarding a way of life.
According to professional skateboarder Bam Margera, you have to "do what you do, have fun doing it, and try not to be too miserable." That is his philosophy on living life while skateboarding to new heights. Margera skates for Team Element. This skateboard company is based in California. They design the most radical skateboard decks offered to those who want to ride the air. Element skateboard decks are one of the best in the industry and have awesome board quality. There are four different types of constructions for Element skateboard decks: Helium, Fiberlight, Featherlight, and Thriftwood. No matter which construction you choose, you are going to get a great element skateboard deck with awesome graphic designs.
Once you have the perfect skateboard deck and wheels, you are ready to trick and ride some air. Try out an ollie, a pop shove-it, a crooked grind, nose slide, possibly a nose pick? If you are new to skating it might just be best to bomb a hill. But be warned: you might bail.
Click on the resource below for more information.
http://www.squidoo.com/element_skateboard_decks
Article Source: http://EzineArticles.com/?expert=Chris_Dreyer
DC Shoes - Where To Buy DC Shoes
DC Shoes - Where To Buy DC Shoes
By Drew Bates
Finding the right DC Shoes can be a daunting task. With so many styles to choose from, should you drive around town until you find the right DC Shoes for you? Or should you choose to shop online? If you do go online, how will you know which sites to use?
Due to the popularity of DC Shoes and their reputation for quality and comfort, DC Shoes can get pretty expensive. If you shop for them at big corporate online outfitters, the prices can get pretty steep. A way to save money is to use one of the many aggregate sites specializing in one day sales and specials. The downside of using these sites is that you do have to devote some time in watching what goes on sales and when it goes on sale. This method also makes it difficult for the consumers that has an immediate need and can't wait until it goes on sale because they know what they want and they want it now as oppose to next month.
Surprisingly enough, you can find really good deals on DC Shoes at online auction sites. The selection can be quite large and the savings can be impressive. There are many options when it comes to choosing which DC Shoes to buy. You can buy items at the asking price known as the "Buy It Now" option. Or you can bid on items in an auction format and usually save money.
Some of the items can start at a bid price of $9.99 and if there are few bidders, a great deal can be had.
Most if not all of these DC Shoes on sale at these auction sites are brand new. It's rare to see a used pair of DC Shoes on sale for obvious reasons. Shopping at these sites are safe. As long as you buy from a seller that has a high feedback rating, the transaction will go smooth. In fact, if their feedback rating is high enough, the item is covered by a buyer protection program.
So if you are in the market for a pair of DC Shoes, consider an auction site.
Buy DC Shoes
Article Source: http://EzineArticles.com/?expert=Drew_Bates
By Drew Bates
Finding the right DC Shoes can be a daunting task. With so many styles to choose from, should you drive around town until you find the right DC Shoes for you? Or should you choose to shop online? If you do go online, how will you know which sites to use?
Due to the popularity of DC Shoes and their reputation for quality and comfort, DC Shoes can get pretty expensive. If you shop for them at big corporate online outfitters, the prices can get pretty steep. A way to save money is to use one of the many aggregate sites specializing in one day sales and specials. The downside of using these sites is that you do have to devote some time in watching what goes on sales and when it goes on sale. This method also makes it difficult for the consumers that has an immediate need and can't wait until it goes on sale because they know what they want and they want it now as oppose to next month.
Surprisingly enough, you can find really good deals on DC Shoes at online auction sites. The selection can be quite large and the savings can be impressive. There are many options when it comes to choosing which DC Shoes to buy. You can buy items at the asking price known as the "Buy It Now" option. Or you can bid on items in an auction format and usually save money.
Some of the items can start at a bid price of $9.99 and if there are few bidders, a great deal can be had.
Most if not all of these DC Shoes on sale at these auction sites are brand new. It's rare to see a used pair of DC Shoes on sale for obvious reasons. Shopping at these sites are safe. As long as you buy from a seller that has a high feedback rating, the transaction will go smooth. In fact, if their feedback rating is high enough, the item is covered by a buyer protection program.
So if you are in the market for a pair of DC Shoes, consider an auction site.
Buy DC Shoes
Article Source: http://EzineArticles.com/?expert=Drew_Bates
Plastic, Composite, Wood Skateboards and Skateboard Trucks
Plastic, Composite, Wood Skateboards and Skateboard Trucks
By L. Winslow
Plastic skateboards are made of several different types of plastics and are relatively easy to make in large quantities by using injection molding manufacturing processes. Most plastic skateboards are considered cheap compared to the wooden skateboards.
Still not all plastic skateboards are flimsy or to be considered lesser. It really depends on the type of plastic used. Most riders like a fairly firm board for tricks with only a little give in the center for hard landings and spring action. All Carbon boards and composite construction boards can hold up to the scrutiny of comparison and some riders prefer them.
Skateboard Trucks that hold the wheels are one of the most important components of modern day skateboards. Generally they consist of an axle, triangular shaped hanger and a king-pin bolt. The trucks are bolted to the face-plate, which is bolted to the skateboard.
The king-pin can be loosened slightly to allow for more or less rigidity making the skateboard able to turn easier or ride stiffer for steering. The rubber grommet helps take up the space when a loser setting is chosen. The trucks on both wooden boards and plastic use the same basic principles and strategies however generally speaking the best trucks will be found attached to the more quality wooden boards.
In the future skateboards will be made of carbon nano-tube construction and they will most likely fly; Hover Boards. Indeed, a hover board will not need to have need wheels or trucks and this will save weight and make them much more aerodynamic for flight. Currently the hover boards are large and cumbersome but that too is changing and many new radical designs are in the pipeline.
L. Winslow is a Technology Advisor to the Online Think Tank, a Futurist and retired entrepreneur. Currently he is planning a bicycle ride across the US to raise money for charity and is sponsored by http://www.Calling-Plans.com - all the proceeds will go to the various charities who sign up.
Article Source: http://EzineArticles.com/?expert=L._Winslow
By L. Winslow
Plastic skateboards are made of several different types of plastics and are relatively easy to make in large quantities by using injection molding manufacturing processes. Most plastic skateboards are considered cheap compared to the wooden skateboards.
Still not all plastic skateboards are flimsy or to be considered lesser. It really depends on the type of plastic used. Most riders like a fairly firm board for tricks with only a little give in the center for hard landings and spring action. All Carbon boards and composite construction boards can hold up to the scrutiny of comparison and some riders prefer them.
Skateboard Trucks that hold the wheels are one of the most important components of modern day skateboards. Generally they consist of an axle, triangular shaped hanger and a king-pin bolt. The trucks are bolted to the face-plate, which is bolted to the skateboard.
The king-pin can be loosened slightly to allow for more or less rigidity making the skateboard able to turn easier or ride stiffer for steering. The rubber grommet helps take up the space when a loser setting is chosen. The trucks on both wooden boards and plastic use the same basic principles and strategies however generally speaking the best trucks will be found attached to the more quality wooden boards.
In the future skateboards will be made of carbon nano-tube construction and they will most likely fly; Hover Boards. Indeed, a hover board will not need to have need wheels or trucks and this will save weight and make them much more aerodynamic for flight. Currently the hover boards are large and cumbersome but that too is changing and many new radical designs are in the pipeline.
L. Winslow is a Technology Advisor to the Online Think Tank, a Futurist and retired entrepreneur. Currently he is planning a bicycle ride across the US to raise money for charity and is sponsored by http://www.Calling-Plans.com - all the proceeds will go to the various charities who sign up.
Article Source: http://EzineArticles.com/?expert=L._Winslow
The Skateboarder is a Unique and Fascinating Person
The Skateboarder is a Unique and Fascinating Person
By Chris Angelo
Skateboarding has grown in popularity over the last several years and anyone that rides a skateboard can be called a skateboarder. Most skateboarders are males although a few females engage in the sport as well. A skateboarder not only engages in the art of skating around on a board, they engage in a lifestyle. Where there is one skater there are usually more very close by, as they do skate together in groups.
Skateboarders can be seen everywhere from shopping mall parking lots to city sidewalks. This sport has grown so much over the past fifty years that it is now known worldwide. The first skateboarders had to make their own skateboards which was usually very simple and made from planks with wheels attached. Eventually, some of the more enthusiastic skateboarders decided it was time to design, create and manufacture new and improved skateboards. Teens were greatly attracted to these news boards because it allowed them to learn more tricks and daring stunts.
By the end of the 1990’s many skateboarders became known as punkers. However, there are still many regular teens, Goths, nerds and even a few adults that love the sport of skateboarding.
All skateboarder’s regardless of how they view themselves is so in love with this sport that skateboarding is all they think about. All skateboarders get along and the more experienced skaters are always interested in helping beginners and giving tips. They enjoy socializing with each other and just generally having a good time. With the exception of competitions, skateboarders just love to hang out and ride together. Still tricks and stunts is a big part of it and skateboarders have to learn and progress at their own pace. They learn to deal with the accidents and injuries that accompany this sport and learn how to push beyond their limits.
If you want to be a skateboarder it is very easy to do. Buy a skateboard or design your own to your taste and start practicing. As a skateboarder you also want to make sure you wear the right clothing and shoes while riding. There are a lot of accessories available many of which you should consider using for safety reasons such as helmets, knee and elbow pads. Other accessories just look good and help to get you in the sprit of skateboarding like T-shirts, stickers, backpacks and more.
Skateboarders are normally in great shape because they really have to exert some energy to perform this sport. It’s fun, changeling, builds confidence and teaches persistence. What more could you ask for in a sport?
Chris Angelo is a skating enthusiast. He enjoys all forms of skating, from Inline to Skateboarding. Get to meet and interact with skaters from all around the world NOW at www.Skaters.com
Article Source: http://EzineArticles.com/?expert=Chris_Angelo
By Chris Angelo
Skateboarding has grown in popularity over the last several years and anyone that rides a skateboard can be called a skateboarder. Most skateboarders are males although a few females engage in the sport as well. A skateboarder not only engages in the art of skating around on a board, they engage in a lifestyle. Where there is one skater there are usually more very close by, as they do skate together in groups.
Skateboarders can be seen everywhere from shopping mall parking lots to city sidewalks. This sport has grown so much over the past fifty years that it is now known worldwide. The first skateboarders had to make their own skateboards which was usually very simple and made from planks with wheels attached. Eventually, some of the more enthusiastic skateboarders decided it was time to design, create and manufacture new and improved skateboards. Teens were greatly attracted to these news boards because it allowed them to learn more tricks and daring stunts.
By the end of the 1990’s many skateboarders became known as punkers. However, there are still many regular teens, Goths, nerds and even a few adults that love the sport of skateboarding.
All skateboarder’s regardless of how they view themselves is so in love with this sport that skateboarding is all they think about. All skateboarders get along and the more experienced skaters are always interested in helping beginners and giving tips. They enjoy socializing with each other and just generally having a good time. With the exception of competitions, skateboarders just love to hang out and ride together. Still tricks and stunts is a big part of it and skateboarders have to learn and progress at their own pace. They learn to deal with the accidents and injuries that accompany this sport and learn how to push beyond their limits.
If you want to be a skateboarder it is very easy to do. Buy a skateboard or design your own to your taste and start practicing. As a skateboarder you also want to make sure you wear the right clothing and shoes while riding. There are a lot of accessories available many of which you should consider using for safety reasons such as helmets, knee and elbow pads. Other accessories just look good and help to get you in the sprit of skateboarding like T-shirts, stickers, backpacks and more.
Skateboarders are normally in great shape because they really have to exert some energy to perform this sport. It’s fun, changeling, builds confidence and teaches persistence. What more could you ask for in a sport?
Chris Angelo is a skating enthusiast. He enjoys all forms of skating, from Inline to Skateboarding. Get to meet and interact with skaters from all around the world NOW at www.Skaters.com
Article Source: http://EzineArticles.com/?expert=Chris_Angelo
What is A Caster Board?
What is A Caster Board?
By Tom Cruz
The caster board or castor board as it may sometimes be called is a made up to 2 small narrow platforms to which as set of caster trucks have been attached at the front of it. This particular board is closely related to a skateboard but instead of having 4 wheels it only has 2 and instead of being solid it comes with a center area that allows the 2 parts of the board to pivot separately from each other.
As you will soon discover if you decide to purchase a caster board such as the Ripstik you will find that no longer do you need to step on to it with one foot and push off with the other to gain momentum. But rather what you need to do is stand on it and then begin to twist your body in a certain way and this will then provide the board with the momentum that is required in order to get it going.
You will find that the Ripstik version is available for around $99 to $129 and comes in a variety of different colors. The makers of this new kind of board are claiming that it is able to provide the person using it with the same kind of sensations that they would feel when either snowboarding or skateboarding because of its unique 2 wheeled design.
In fact a person when riding these boards is able to either make their way downhill just as a snowboarder would or they can easily make it uphill as well in much the same way as skateboarders do. However in order to achieve this they need to bend their knees and then twist their hips which will then help them to propel the board forward. Each board is designed so that the two platforms on which a person’s feet are placed are connected using a torsion bar (made from metal). This bar then allows each platform to rotate independently from one and other and so provides the rider with the ability to allow them to tilt into sharp turns without losing their balance or it can also help them to perform much more precise tricks than they would ever be able to with a skateboard.
However if you really want to understand the way in which a caster board such as the Ripstik works before you make your purchase there are plenty of sites online which will show you just how it works and the way in which the rider will need to move their body correctly.
To find out more about the Ripstik caster board visit www.ripstikreview.com
Article Source: http://EzineArticles.com/?expert=Tom_Cruz
By Tom Cruz
The caster board or castor board as it may sometimes be called is a made up to 2 small narrow platforms to which as set of caster trucks have been attached at the front of it. This particular board is closely related to a skateboard but instead of having 4 wheels it only has 2 and instead of being solid it comes with a center area that allows the 2 parts of the board to pivot separately from each other.
As you will soon discover if you decide to purchase a caster board such as the Ripstik you will find that no longer do you need to step on to it with one foot and push off with the other to gain momentum. But rather what you need to do is stand on it and then begin to twist your body in a certain way and this will then provide the board with the momentum that is required in order to get it going.
You will find that the Ripstik version is available for around $99 to $129 and comes in a variety of different colors. The makers of this new kind of board are claiming that it is able to provide the person using it with the same kind of sensations that they would feel when either snowboarding or skateboarding because of its unique 2 wheeled design.
In fact a person when riding these boards is able to either make their way downhill just as a snowboarder would or they can easily make it uphill as well in much the same way as skateboarders do. However in order to achieve this they need to bend their knees and then twist their hips which will then help them to propel the board forward. Each board is designed so that the two platforms on which a person’s feet are placed are connected using a torsion bar (made from metal). This bar then allows each platform to rotate independently from one and other and so provides the rider with the ability to allow them to tilt into sharp turns without losing their balance or it can also help them to perform much more precise tricks than they would ever be able to with a skateboard.
However if you really want to understand the way in which a caster board such as the Ripstik works before you make your purchase there are plenty of sites online which will show you just how it works and the way in which the rider will need to move their body correctly.
To find out more about the Ripstik caster board visit www.ripstikreview.com
Article Source: http://EzineArticles.com/?expert=Tom_Cruz
The Beginner's Guide to Building Ramps
The Beginner's Guide to Building Ramps
By Brandon Cardone
Disclaimer: Building and riding ramps can be fun and rewarding; however, caution should be practiced with both. The author Brandon Cardone and any other contributors to this article are in no way, shape or form responsible for any legal matters, injuries or even death that may occur as a result of the information and content in this article.
The following chapter is one of five that can be found in my skateboard ramp building guide "The Beginner's Guide To Building Ramps," This 54 page guide can be instantly downloaded in PDF format from www.buildaramp.com. The skateboard ramp building guide is filled with tons of photos and easy to understand instructions and illustrations, you will also find on my website, tons of useful links related to skateboard ramps, a ramp building photo gallery, free skateboard wallpaper for your computer, a free skateboard screen saver, and even up to the minute skateboarding RSS news feeds.
Introduction
So you want to build a skateboard ramp, maybe you are a parent and want to build something for your kid. Maybe you have been skateboarding, riding BMX, or inline for a while and realize that you want more than the few spots you get kicked out of on a regular basis. Whatever the reason, you?ve started in the right direction by reading this article. Building ramps is a productive learning experience, but the most important thing is that it is fun and very rewarding if it is done right.
Most people really don?t understand how to build skateboard ramps and end up giving up before they even give it a second thought. I have people all the time ask me “How do you bend the wood like that?” or “Where would you even begin building something like that? ”Questions like these are why I wrote this guide in the first place. I want people like you to know that it really isn?t that hard to build skateboard ramps if you have the right knowledge under your belt. I have been building ramps with my friend Mike Fitch since I was like 12 years old and over the years and plenty of trial and error, we have learned the art of building skateboard ramps. I asked myself if this kind of knowledge should be kept a secret, then I remembered all the fun I had growing up building my own stuff to skate and all the friends I have made over the years. We even had the chance to fulfill our dream of building an indoor skateboard park located in Johnson City, NY, East Coast Terminal as a way of giving back to the pastime that gave me direction and purpose in my life. I hope this article gives you that spark of inspiration that I found so many years ago. Who knows, there could be your own dream skate park lurking deep inside of you just waiting to be built and for others to enjoy. I wish you the best of luck in your quest and, most importantly, have fun.
Chapter 1 "Scope Out The Territory"
• Before you start building
• Some Things to consider
• After the site has been decided and inspected
Before you Start Building your Skateboard Ramp
Before you get all gung ho and go down to your local lumber store to buy materials and grab the tools out of the shed, there are some things you should think about before you start building. For example, if all you want is a slider box or a jump ramp, you shouldn?t need a huge area to put your ramps. In this kind of a situation, an empty parking lot or your driveway will work. Be creative, like screwing some trucks and wheels from an old skateboard or roller skates to the side so you can wheel it around easy. You could even cut handles in the sides of the templates to carry your ramp easier.
If you had your heart set on a ramp bigger and unmovable, obviously you will need more space. You see, the idea here is that if you know where you are going to be building your ramps, you can measure out the area and draw it on some graph paper or even some regular paper will work fine.
Some Things to Consider
• Consider how easy it will be to get your materials to the construction site
If your spot is way out in the woods, you better have some muscles because you will be carrying a lot of wood. This is when a wheel barrow comes in handy.
• Access to electricity
Power tools are your friends and building a ramp without them is very hard, but not impossible if you are Amish. A generator or a bunch of extension cords might be the way to go.
• Neighbors and noise
Those nosey neighbors of yours already hate you and are just waiting to ruin your fun. Will they call the cops when you?re having a session at 3:00 in the morning? One solution to this problem is to fill the coping with concrete or sand and nail a layer of carpet to the underside of your ramp.
• Weather
Wood and bad weather don?t tend to agree with each other over time. If you can find an area that is protected from Mother Nature, then more power to you. For the rest of us, buying a good tarp is a really good investment. If you have the extra wood you could even build your own make shift canopy, this way you can ride your ramp even if it?s raining. You may also want to consider building your ramp up of the ground on cinderblocks to keep the ramp high, dry and level.
• Helpers
The more people you can find to help you build the better off you will be.
• Ask everyone you know about available space
Hey you never know, your sisters, boyfriends, dad might have an empty garage or empty lot of land that they will sell you dirt-cheap.
• Damage prone areas
Your trying to do a 360 flip pivot to fakie and oops, you just zipped out and your board is heading 100 miles an hour towards your mom?s new car. You should take note of breakable objects around your ramps and make the necessary barriers to prevent them from being damaged.
• Zoning Laws
You may be living in an area where it is the law to get a building permit or you could just take your chances and hope your local zoning board doesn?t find out. You may end up having to pay fines and tear down your new creation. Trust me it isn?t fun to take something apart that you?ve put so much time and effort into.
Remember, it is important that you build your ramps on a flat or level surface. If you don?t, your ramp will not be as easy to build and ride. Once you have decided on a spot to build your ramps, start by measuring the whole parameter of the space you are going to be working in. Measure out any obstructions that might get in the way when you are building, like a tree or a telephone pole, things like that. You should also observe the landscape to see if you will have to level the area out or even build your ramp up off the ground on posts. By doing this you are saving yourself a lot of trouble down the road when you are halfway through your project and realize you don?t have enough room or your that one side of your ramp goes uphill.
By: Brandon Cardone
Here is a list of the other chapters that can be found in "The Beginner's Guide To Building ramps" found at www.buildaramp.com
Chapter 2 "Construction Preparation" Chapter 3 "All About Ramp Templates" Chapter 4 "All About Framing a Ramp" Chapter 5 "All About Sheeting Ramp"
Brandon Cardone has been skateboarding for over 20 years and has been building skateboard ramps for just as long. His knowledge and skills at building skateboard ramps is well known in the skateboarding community. Brandon's website http://www.buildaramp.com is quickly becoming the number one reliable source of information and help with building your own skateboard ramps, while making it an affordable, fun, constructive learning process.
Article Source: http://EzineArticles.com/?expert=Brandon_Cardone
By Brandon Cardone
Disclaimer: Building and riding ramps can be fun and rewarding; however, caution should be practiced with both. The author Brandon Cardone and any other contributors to this article are in no way, shape or form responsible for any legal matters, injuries or even death that may occur as a result of the information and content in this article.
The following chapter is one of five that can be found in my skateboard ramp building guide "The Beginner's Guide To Building Ramps," This 54 page guide can be instantly downloaded in PDF format from www.buildaramp.com. The skateboard ramp building guide is filled with tons of photos and easy to understand instructions and illustrations, you will also find on my website, tons of useful links related to skateboard ramps, a ramp building photo gallery, free skateboard wallpaper for your computer, a free skateboard screen saver, and even up to the minute skateboarding RSS news feeds.
Introduction
So you want to build a skateboard ramp, maybe you are a parent and want to build something for your kid. Maybe you have been skateboarding, riding BMX, or inline for a while and realize that you want more than the few spots you get kicked out of on a regular basis. Whatever the reason, you?ve started in the right direction by reading this article. Building ramps is a productive learning experience, but the most important thing is that it is fun and very rewarding if it is done right.
Most people really don?t understand how to build skateboard ramps and end up giving up before they even give it a second thought. I have people all the time ask me “How do you bend the wood like that?” or “Where would you even begin building something like that? ”Questions like these are why I wrote this guide in the first place. I want people like you to know that it really isn?t that hard to build skateboard ramps if you have the right knowledge under your belt. I have been building ramps with my friend Mike Fitch since I was like 12 years old and over the years and plenty of trial and error, we have learned the art of building skateboard ramps. I asked myself if this kind of knowledge should be kept a secret, then I remembered all the fun I had growing up building my own stuff to skate and all the friends I have made over the years. We even had the chance to fulfill our dream of building an indoor skateboard park located in Johnson City, NY, East Coast Terminal as a way of giving back to the pastime that gave me direction and purpose in my life. I hope this article gives you that spark of inspiration that I found so many years ago. Who knows, there could be your own dream skate park lurking deep inside of you just waiting to be built and for others to enjoy. I wish you the best of luck in your quest and, most importantly, have fun.
Chapter 1 "Scope Out The Territory"
• Before you start building
• Some Things to consider
• After the site has been decided and inspected
Before you Start Building your Skateboard Ramp
Before you get all gung ho and go down to your local lumber store to buy materials and grab the tools out of the shed, there are some things you should think about before you start building. For example, if all you want is a slider box or a jump ramp, you shouldn?t need a huge area to put your ramps. In this kind of a situation, an empty parking lot or your driveway will work. Be creative, like screwing some trucks and wheels from an old skateboard or roller skates to the side so you can wheel it around easy. You could even cut handles in the sides of the templates to carry your ramp easier.
If you had your heart set on a ramp bigger and unmovable, obviously you will need more space. You see, the idea here is that if you know where you are going to be building your ramps, you can measure out the area and draw it on some graph paper or even some regular paper will work fine.
Some Things to Consider
• Consider how easy it will be to get your materials to the construction site
If your spot is way out in the woods, you better have some muscles because you will be carrying a lot of wood. This is when a wheel barrow comes in handy.
• Access to electricity
Power tools are your friends and building a ramp without them is very hard, but not impossible if you are Amish. A generator or a bunch of extension cords might be the way to go.
• Neighbors and noise
Those nosey neighbors of yours already hate you and are just waiting to ruin your fun. Will they call the cops when you?re having a session at 3:00 in the morning? One solution to this problem is to fill the coping with concrete or sand and nail a layer of carpet to the underside of your ramp.
• Weather
Wood and bad weather don?t tend to agree with each other over time. If you can find an area that is protected from Mother Nature, then more power to you. For the rest of us, buying a good tarp is a really good investment. If you have the extra wood you could even build your own make shift canopy, this way you can ride your ramp even if it?s raining. You may also want to consider building your ramp up of the ground on cinderblocks to keep the ramp high, dry and level.
• Helpers
The more people you can find to help you build the better off you will be.
• Ask everyone you know about available space
Hey you never know, your sisters, boyfriends, dad might have an empty garage or empty lot of land that they will sell you dirt-cheap.
• Damage prone areas
Your trying to do a 360 flip pivot to fakie and oops, you just zipped out and your board is heading 100 miles an hour towards your mom?s new car. You should take note of breakable objects around your ramps and make the necessary barriers to prevent them from being damaged.
• Zoning Laws
You may be living in an area where it is the law to get a building permit or you could just take your chances and hope your local zoning board doesn?t find out. You may end up having to pay fines and tear down your new creation. Trust me it isn?t fun to take something apart that you?ve put so much time and effort into.
Remember, it is important that you build your ramps on a flat or level surface. If you don?t, your ramp will not be as easy to build and ride. Once you have decided on a spot to build your ramps, start by measuring the whole parameter of the space you are going to be working in. Measure out any obstructions that might get in the way when you are building, like a tree or a telephone pole, things like that. You should also observe the landscape to see if you will have to level the area out or even build your ramp up off the ground on posts. By doing this you are saving yourself a lot of trouble down the road when you are halfway through your project and realize you don?t have enough room or your that one side of your ramp goes uphill.
By: Brandon Cardone
Here is a list of the other chapters that can be found in "The Beginner's Guide To Building ramps" found at www.buildaramp.com
Chapter 2 "Construction Preparation" Chapter 3 "All About Ramp Templates" Chapter 4 "All About Framing a Ramp" Chapter 5 "All About Sheeting Ramp"
Brandon Cardone has been skateboarding for over 20 years and has been building skateboard ramps for just as long. His knowledge and skills at building skateboard ramps is well known in the skateboarding community. Brandon's website http://www.buildaramp.com is quickly becoming the number one reliable source of information and help with building your own skateboard ramps, while making it an affordable, fun, constructive learning process.
Article Source: http://EzineArticles.com/?expert=Brandon_Cardone
How to Design the Skateboard of The Future
How to Design the Skateboard of The Future
By L. Winslow
What if I told you that the Online Think Tank is looking for smart folks, engineers, designers and skateboarders to help us radically improve the skateboard of the future? A skateboard, which was fully integrated with the latest technologies and one which could fly; a hover board like in Back to the Future II. Well that is exactly what we plan to do and we are working on the beginning stages of the research report right now.
Yes let's build a net-centric Skateboard with active RFID chips, it can dodge obstacles or incoming objects and also be fixed with the latest lidar, radar, stereo sonar and optical flow sensors. Let's make all the components fully integrated with the skatepark and/or a Video Game, Virtual Reality C.A.V.E. or system or even a full on simulator.
We should make these tricky boards to the kids and let them have fun? Have them test them out and then make them even better. I think I really enjoyed the movie "Back to the Future" with Michael J. Fox and Biff and perhaps you did too. And the skateboards have been a fascination ever sense, of course all young boys of my age grew up with the first skateboards. Catamaran'ing down steep streets, doing switch back maneuvers and it was simply part of being growing up.
In the first committee meeting for the report our team identified several potential emerging technologies that should be integrated into the hoverboard;
1.) How about a set of tap push button controls to put up the landing gear, make it a hover board? 3 in the green and away they go hover board style?
2.) Voice Activated WiFi, iPod, VoIP, cell phone and IM. (already have surfboards with wifi, cell phones)
3.) Holographic Image display project in front of the board so the rider can match it while flying thru the air to insure a perfect maneuver?
4.) All run by LED lights which are charging as each bump in the side walk jars tiny components, like a shake-able flash light.
5.) We can make the board invisible using MITs new light bending stuff? Change colors?
6.) Use Mind Control to send commands to the hoverboard via (individual mind-mapping fMRI sequence generator).
7.) The Hover Board/Skate Board/ Wave Rider could be used in any gravity displacement too. Earth, Mars, Moon. "The Lunar Board" or something? Matching agility to human ability, the next step in the evolution of fun!
8.) Interactive Virtual Reality and Augmented Reality living room video game with skateboard, no worries when weather is bad.
9.) Couple it with eLearning initiatives; make it fun to learn while riding a skateboard. Learn physics while skateboarding, it's all physics anyway.
10.) Interactive skate parks and indoor recreational facilities of the future.
All this technology already exists NOW and it is only a matter of cost, weight and size. Remember Moore's law for electronics. We are seeing this now with UAVs to MAVs to the size of insects. It is all doable only a matter of imagination and will, funding and ROI. Actually, it's all almost here the way I see it. And so the journey begins; the skateboard of the future will fly, and it will fly like nothing else.
L. Winslow is a Technology Advisor to the Online Think Tank, a Futurist and retired entrepreneur. Currently he is planning a bicycle ride across the US to raise money for charity and is sponsored by http://www.Calling-Plans.com and all the proceeds will go to various charities who sign up.
Article Source: http://EzineArticles.com/?expert=L._Winslow
By L. Winslow
What if I told you that the Online Think Tank is looking for smart folks, engineers, designers and skateboarders to help us radically improve the skateboard of the future? A skateboard, which was fully integrated with the latest technologies and one which could fly; a hover board like in Back to the Future II. Well that is exactly what we plan to do and we are working on the beginning stages of the research report right now.
Yes let's build a net-centric Skateboard with active RFID chips, it can dodge obstacles or incoming objects and also be fixed with the latest lidar, radar, stereo sonar and optical flow sensors. Let's make all the components fully integrated with the skatepark and/or a Video Game, Virtual Reality C.A.V.E. or system or even a full on simulator.
We should make these tricky boards to the kids and let them have fun? Have them test them out and then make them even better. I think I really enjoyed the movie "Back to the Future" with Michael J. Fox and Biff and perhaps you did too. And the skateboards have been a fascination ever sense, of course all young boys of my age grew up with the first skateboards. Catamaran'ing down steep streets, doing switch back maneuvers and it was simply part of being growing up.
In the first committee meeting for the report our team identified several potential emerging technologies that should be integrated into the hoverboard;
1.) How about a set of tap push button controls to put up the landing gear, make it a hover board? 3 in the green and away they go hover board style?
2.) Voice Activated WiFi, iPod, VoIP, cell phone and IM. (already have surfboards with wifi, cell phones)
3.) Holographic Image display project in front of the board so the rider can match it while flying thru the air to insure a perfect maneuver?
4.) All run by LED lights which are charging as each bump in the side walk jars tiny components, like a shake-able flash light.
5.) We can make the board invisible using MITs new light bending stuff? Change colors?
6.) Use Mind Control to send commands to the hoverboard via (individual mind-mapping fMRI sequence generator).
7.) The Hover Board/Skate Board/ Wave Rider could be used in any gravity displacement too. Earth, Mars, Moon. "The Lunar Board" or something? Matching agility to human ability, the next step in the evolution of fun!
8.) Interactive Virtual Reality and Augmented Reality living room video game with skateboard, no worries when weather is bad.
9.) Couple it with eLearning initiatives; make it fun to learn while riding a skateboard. Learn physics while skateboarding, it's all physics anyway.
10.) Interactive skate parks and indoor recreational facilities of the future.
All this technology already exists NOW and it is only a matter of cost, weight and size. Remember Moore's law for electronics. We are seeing this now with UAVs to MAVs to the size of insects. It is all doable only a matter of imagination and will, funding and ROI. Actually, it's all almost here the way I see it. And so the journey begins; the skateboard of the future will fly, and it will fly like nothing else.
L. Winslow is a Technology Advisor to the Online Think Tank, a Futurist and retired entrepreneur. Currently he is planning a bicycle ride across the US to raise money for charity and is sponsored by http://www.Calling-Plans.com and all the proceeds will go to various charities who sign up.
Article Source: http://EzineArticles.com/?expert=L._Winslow
How To Ride a Ripstick Skateboard
How To Ride a Ripstick Skateboard
By Matthew Scillitani
1. How to balance on it and how to coast
If you want to get started riding it faster, you must start on a hill. Starting on a hill will help you go faster and balance quicker. Stand on it and have someone to hold you to help you balance. Don’t start going just yet. Try to balance on it standing still for just a minute or two. When you feel comfortable, have your friend hold on to you while you slowly coast down the hill so you don’t fall off. This will help you balance and give you a better feel for the caster board. Keep doing this until you feel confident you can balance yourself straight down the hill without assistance. Now let’s get propelling!
2. How to propel
Again, starting on hill with a friend helping you stand on the Ripstick, coast down the hill and start to move your feet back and forth so that both sides of the skateboard are turning opposite ways. Start with little motions by pushing your toes down on your right foot while pushing your heel down on your left foot. Then push your toes down on your left foot and your heel down on your right foot. As you continue to do this and get better and better, make the motions bigger and bigger and start to use your legs and hips in your movements. Hey, you are doing it. You are riding a Ripstick!
3. How to start on your own
After you feel you can ride it then you can try starting on your own. First you must go on a sloped area. If you are a righty, place your left leg on the front part of the Ripstick and balance it. Then give a hard push with your right leg on the ground and get on as fast as you can. Start to propel the board to gain your balance and you will go faster and faster. Starting on your own is the hardest part, all you need is patience. Do not listen to other reviews that discourage you to ride it gets easier with practice.
Matthew Scillitani ripstick skateboards
Article Source: http://EzineArticles.com/?expert=Matthew_Scillitani
By Matthew Scillitani
1. How to balance on it and how to coast
If you want to get started riding it faster, you must start on a hill. Starting on a hill will help you go faster and balance quicker. Stand on it and have someone to hold you to help you balance. Don’t start going just yet. Try to balance on it standing still for just a minute or two. When you feel comfortable, have your friend hold on to you while you slowly coast down the hill so you don’t fall off. This will help you balance and give you a better feel for the caster board. Keep doing this until you feel confident you can balance yourself straight down the hill without assistance. Now let’s get propelling!
2. How to propel
Again, starting on hill with a friend helping you stand on the Ripstick, coast down the hill and start to move your feet back and forth so that both sides of the skateboard are turning opposite ways. Start with little motions by pushing your toes down on your right foot while pushing your heel down on your left foot. Then push your toes down on your left foot and your heel down on your right foot. As you continue to do this and get better and better, make the motions bigger and bigger and start to use your legs and hips in your movements. Hey, you are doing it. You are riding a Ripstick!
3. How to start on your own
After you feel you can ride it then you can try starting on your own. First you must go on a sloped area. If you are a righty, place your left leg on the front part of the Ripstick and balance it. Then give a hard push with your right leg on the ground and get on as fast as you can. Start to propel the board to gain your balance and you will go faster and faster. Starting on your own is the hardest part, all you need is patience. Do not listen to other reviews that discourage you to ride it gets easier with practice.
Matthew Scillitani ripstick skateboards
Article Source: http://EzineArticles.com/?expert=Matthew_Scillitani
Exercise Tips For Skateboardist
Exercise Tips For Skateboardist
by: Dana Bradley
Many skateboarders feel that it is unnecessary to engage in exercise for this type of sport. Can ‘Ollie’s’ and ‘kick-flips’ count as exercise? Notice that in every sport, a sportsman or sportswoman must engage in some form of exercising before competing. Just like a boxer in the ring throwing punches can not pass as excising, a skateboarder doing twists, turns and flips can not take place as exercise.
It is recommended that a skateboarder exercise at least 3 to 5 times per week. A skateboarder should also engage in stretching before practicing or competing. Those who exercise have more energy and are more likely to succeed in this sport. In order to be a skateboarder, one has to be alert. You can’t be alert while feeling fatigue and sloppy. Notice those skateboarders who are the moodiest while practicing or competing. Moodiness stems from not taking care of one’s body. Yes, not exercising can actually affects a person’s confidence. Those who exercise regularly are the most successful at this sport.
Skateboarding is a lot like dancing, especially when there is music in the background. But a dancer doesn’t just settle for dancing or call it exercise. During a dancer’s time off, they engage in a clean and healthy lifestyle which includes exercising.
Exercising Tips for Skateboarders
Tip one: Think about an exercise that’s easy and that you can do everyday, at least 3 to 5 times per day. This can be jogging around the park or your neighborhood, push ups, sit ups, weight lifting or joining your local gym.
Tip two: Make sure that you stretch or do a mini exercise routine before skateboarding. Stretching reduces injuries. This includes stretching before a competition or a big skateboarding event.
Tip three: Before beginning any exercise routine, no matter how old or young or what shape you are in, make sure that you consult your physician. He or she may be able to recommend an exercise technique that is compatible with your body type.
Please abide by these tips and remember that skateboarding is supposed to be adventurous. Also, you don't have to burn yourself out when exercising. Learn a few exercise techniques and stick with them. To be a great skate boarder, have fun, and remember that results from exercising are not always instant. You have to be consistent and disciplined when exercising. Exercising is not always for a person to loose weight. Exercise helps to receive energy and the ability to maintain their weight.
About The Author
Dana Bradley writes about http://www.buyskateboardgear.com, http://www.buyskateboardgear.com/Coupons/DicksSportingGoods.com.html and http://www.SportsTeamFanHeaven.com
by: Dana Bradley
Many skateboarders feel that it is unnecessary to engage in exercise for this type of sport. Can ‘Ollie’s’ and ‘kick-flips’ count as exercise? Notice that in every sport, a sportsman or sportswoman must engage in some form of exercising before competing. Just like a boxer in the ring throwing punches can not pass as excising, a skateboarder doing twists, turns and flips can not take place as exercise.
It is recommended that a skateboarder exercise at least 3 to 5 times per week. A skateboarder should also engage in stretching before practicing or competing. Those who exercise have more energy and are more likely to succeed in this sport. In order to be a skateboarder, one has to be alert. You can’t be alert while feeling fatigue and sloppy. Notice those skateboarders who are the moodiest while practicing or competing. Moodiness stems from not taking care of one’s body. Yes, not exercising can actually affects a person’s confidence. Those who exercise regularly are the most successful at this sport.
Skateboarding is a lot like dancing, especially when there is music in the background. But a dancer doesn’t just settle for dancing or call it exercise. During a dancer’s time off, they engage in a clean and healthy lifestyle which includes exercising.
Exercising Tips for Skateboarders
Tip one: Think about an exercise that’s easy and that you can do everyday, at least 3 to 5 times per day. This can be jogging around the park or your neighborhood, push ups, sit ups, weight lifting or joining your local gym.
Tip two: Make sure that you stretch or do a mini exercise routine before skateboarding. Stretching reduces injuries. This includes stretching before a competition or a big skateboarding event.
Tip three: Before beginning any exercise routine, no matter how old or young or what shape you are in, make sure that you consult your physician. He or she may be able to recommend an exercise technique that is compatible with your body type.
Please abide by these tips and remember that skateboarding is supposed to be adventurous. Also, you don't have to burn yourself out when exercising. Learn a few exercise techniques and stick with them. To be a great skate boarder, have fun, and remember that results from exercising are not always instant. You have to be consistent and disciplined when exercising. Exercising is not always for a person to loose weight. Exercise helps to receive energy and the ability to maintain their weight.
About The Author
Dana Bradley writes about http://www.buyskateboardgear.com, http://www.buyskateboardgear.com/Coupons/DicksSportingGoods.com.html and http://www.SportsTeamFanHeaven.com
Subscribe to:
Posts (Atom)