How to Backside Noseslide on a Skateboard
By Keith Bradford
How to Backside Noseslide
There are two ways to go about doing a backside noseslide, the first way which I would recommend you start out with is...
Slappy Style Noseslides: This is where you don't have to actually pop your board to do a noseslide. They are a very fun trick to learn!
Step 1: Have one foot on the nose and one on the tail.
Step 2: Ride at the ledge at a reasonable pace and on a 30 - 45 degree angle.
Step 3: Start leaning your weight back as if you were doing a manual.
Step 4: Once your nose hits the curb shift your weight to the front of your board.
Step 5: Be prepared to slide when you get on the curb and keep your balance.
Step 6: As you start to slow down shift your weight back onto the tail of your board and turn out.
The second way of doing a noseslide is by popping into it. It's a great deal harder to do than Slappy Style so I would recommend having that down first before you try this way. You also should have your Frontside 180s down.
Step 1: Ride parallel to the ledge at a comfortable pace.
Step 2: Start to bend your knees and twist your shoulders as if you were doing a frontside 180 or BS boardslide but you'll probably want to have your front foot a bit higher than usual.
Step 3: Pop the board and start to do a 90 degree turn towards the ledge.
Step 4: Once you reach your peak slam the nose down on the ledge and put all your weight on it.
Tip: The key to ollieing into a noseslide is that you get above the ledge before locking it in. The biggest mistake I see is that people try to lift their nose up onto the ledge instead of slamming it in from above.
Step 5: Keep your balance and slide the ledge for a bit.
Step 6: Once you slow down shift your weight back to your tail and at the same time twist your shoulders back the way you entered the trick, or if you want to go to fakie twist your shoulders the opposite way.
Step 7: Ride away and you've just learned how to Backside Noseslide on a Skateboard!
For more skateboarding trick tips please download my free eBook "A Beginners Guide to Skateboarding" - Download it Here!
And also check out my site Easy Skateboard Tricks for newly updated skateboarding content.
Happy Skateboarding!
Article Source: http://EzineArticles.com/?expert=Keith_Bradford
How to 50-50 Grind on a Skateboard
How to 50-50 Grind on a Skateboard
By Keith Bradford
The 50-50 is probably the first grind you should learn, it's when both of your trucks are grinding on a ledge or rail. First off, find yourself a small ledge or curb and wax it with some candles. To make sure it's going to grind nice and smooth push your trucks along it and keep rewaxing until it turns to a nice silverish colour.
Step 1. Approach the ledge at an almost parallel angle, a big mistake that some skaters make is that they go at it at too big of an angle, which makes it harder to lock in and grind.
Step 2. As you get to the curb pop an ollie and bring your feet towards the curb.
Step 3. Slam onto the ledge with both trucks and make sure you have your knees bent and are prepared to grind... meaning shoulders square to the board with your weight balanced between the front and the back of your board.
Step 4. As you grind along the ledge start to get ready to pop out by placing your back foot on the tail.
Step 5. Slowly start to lean back and apply pressure to your tail, as if you were doing a manual.
Step 6. Your board should fall nicely off the ledge and now it's just a matter of finding your balance once you hit the ground and riding away.
Step 7: Once you've done one, do another hundred of them because this trick is key for future grinds.
For more skateboarding trick tips please download my free ebook "A Beginners Guide to Skateboarding" - Download it Here!
And also check out my site Easy Skateboard Tricks for newly updated skateboarding content.
Happy Skateboarding!
Article Source: http://EzineArticles.com/?expert=Keith_Bradford
By Keith Bradford
The 50-50 is probably the first grind you should learn, it's when both of your trucks are grinding on a ledge or rail. First off, find yourself a small ledge or curb and wax it with some candles. To make sure it's going to grind nice and smooth push your trucks along it and keep rewaxing until it turns to a nice silverish colour.
Step 1. Approach the ledge at an almost parallel angle, a big mistake that some skaters make is that they go at it at too big of an angle, which makes it harder to lock in and grind.
Step 2. As you get to the curb pop an ollie and bring your feet towards the curb.
Step 3. Slam onto the ledge with both trucks and make sure you have your knees bent and are prepared to grind... meaning shoulders square to the board with your weight balanced between the front and the back of your board.
Step 4. As you grind along the ledge start to get ready to pop out by placing your back foot on the tail.
Step 5. Slowly start to lean back and apply pressure to your tail, as if you were doing a manual.
Step 6. Your board should fall nicely off the ledge and now it's just a matter of finding your balance once you hit the ground and riding away.
Step 7: Once you've done one, do another hundred of them because this trick is key for future grinds.
For more skateboarding trick tips please download my free ebook "A Beginners Guide to Skateboarding" - Download it Here!
And also check out my site Easy Skateboard Tricks for newly updated skateboarding content.
Happy Skateboarding!
Article Source: http://EzineArticles.com/?expert=Keith_Bradford
Skateboarding Information
Skateboarding Information
By Cheyenne Ibit
Skateboarding is to take action of riding as well as doing or performing some tricks using a tool called a skateboard. The person who is doing skateboarding is denoted to as the skateboarder or the skater. This may be an art, a fun activity, a job for the others, or just their way by means of transportation. Skateboarding is somewhat modern. This is been shapely and inspired by skateboarders all over the years. At 2002, around 18.5 million are present skateboarders of the world. The 85% of these skateboarders is at the age of 18. 74% of it was males.
Skateboarding is almost certainly born in late 1940s or 1950s during the surfers of California desired much thing in surfing if ever there are flat waves. Nobody knows who formulated the first skateboard, somewhat; it seems that some people come up with same thoughts at the same time. The first skaters begin with wood of boards or boxes attaching a roller skate wheel at its bottom. The boards are turned into a plank and eventually the companies' produces deck of pushed layers of lumber like the skateboard top decks today.
All through this time, skateboarding is seen as for fun rather than surfing. The 1st surf shop manufacturer of skateboards is at LA, California, designed to be for the surfers of their time. Bill Richard, the owner of the shop, completed an agreement to the Chicago Roller Skate Company to make some set of skate with wheels attaches to a square lumber board. Skateboarding was originally referred to as a sidewalk surfing, along with early skateboarder followed the style of surfing and maneuvers.
The skateboarding began to change by the development of skate parks or ramp skating. Early skate activities have consisted mostly of two dimensional tricks as of riding only two wheels, high jumping on a bar then land on the board once more is known as "hippie jump", the "pivot" is spinning in the back wheel jumping long from one board to a different board or "slalom".
In 1965, the international championship broadcast skateboarding on the national television and was then popularize in that time on a national magazine called Skateboarder Magazine. The development of this sport through this period is also seen in the sale figures of Makaha that quoted $10million value of board sales with in the year of 1963 & 1965. The fame of skateboarding drops and remains low up to 1970s because the youth were faded in recent years because of the figure of the skateboarding as of rebellious. Some cities continuously oppose the building of skate parks, for fear of increasing crimes and drugs throughout their area.
Learn the basic information about Skateboarding.
For more information visit us at: http://SkateboardZone.org/.
Article Source: http://EzineArticles.com/?expert=Cheyenne_Ibit
By Cheyenne Ibit
Skateboarding is to take action of riding as well as doing or performing some tricks using a tool called a skateboard. The person who is doing skateboarding is denoted to as the skateboarder or the skater. This may be an art, a fun activity, a job for the others, or just their way by means of transportation. Skateboarding is somewhat modern. This is been shapely and inspired by skateboarders all over the years. At 2002, around 18.5 million are present skateboarders of the world. The 85% of these skateboarders is at the age of 18. 74% of it was males.
Skateboarding is almost certainly born in late 1940s or 1950s during the surfers of California desired much thing in surfing if ever there are flat waves. Nobody knows who formulated the first skateboard, somewhat; it seems that some people come up with same thoughts at the same time. The first skaters begin with wood of boards or boxes attaching a roller skate wheel at its bottom. The boards are turned into a plank and eventually the companies' produces deck of pushed layers of lumber like the skateboard top decks today.
All through this time, skateboarding is seen as for fun rather than surfing. The 1st surf shop manufacturer of skateboards is at LA, California, designed to be for the surfers of their time. Bill Richard, the owner of the shop, completed an agreement to the Chicago Roller Skate Company to make some set of skate with wheels attaches to a square lumber board. Skateboarding was originally referred to as a sidewalk surfing, along with early skateboarder followed the style of surfing and maneuvers.
The skateboarding began to change by the development of skate parks or ramp skating. Early skate activities have consisted mostly of two dimensional tricks as of riding only two wheels, high jumping on a bar then land on the board once more is known as "hippie jump", the "pivot" is spinning in the back wheel jumping long from one board to a different board or "slalom".
In 1965, the international championship broadcast skateboarding on the national television and was then popularize in that time on a national magazine called Skateboarder Magazine. The development of this sport through this period is also seen in the sale figures of Makaha that quoted $10million value of board sales with in the year of 1963 & 1965. The fame of skateboarding drops and remains low up to 1970s because the youth were faded in recent years because of the figure of the skateboarding as of rebellious. Some cities continuously oppose the building of skate parks, for fear of increasing crimes and drugs throughout their area.
Learn the basic information about Skateboarding.
For more information visit us at: http://SkateboardZone.org/.
Article Source: http://EzineArticles.com/?expert=Cheyenne_Ibit
Anatomy of a Skateboard
Anatomy of a Skateboard
By Duke McCallister
Upon a first or quick glance, a skateboard looks pretty simple and innocuous. In layman's terms, a skateboard deck is just a piece of wood with some wheels attached to its bottom. However, as with just about anything in life, upon closer inspection, you'll quickly discover that there's much more to a skateboard than meets the eye. Skateboards are, in fact, at the same time, complicated and delicate - which allows skateboarders the freedom to move about in any environment with precision, speed, toughness, and, when required, the ability to defy gravity and grind down rails. At the same time, expert riders and enthusiasts are also capable of performing incredible leaps, jumps and other mind-boggling tricks.
That's pretty impressive for something which, at its core, is just a piece of wood with wheels affixed to its underside. So, what makes a skateboard a skateboard? What goes into its construction and development which allows professional and high-level skateboarders the ability to propel, jump, turn, twist and do all those other super-cool things? And while a skateboard would be pretty much useless without someone activating and using it, the design of the actual deck, from its trucks to its grip tape and everything in between, also has something to do with it too.
With that being said, there are certain elements and aspects which are nothing but absolutely critical to a skateboard. Without these components, a skateboard would literally be - as has been mentioned previously - just a piece of wood with wheels stuck to it. However, certain modifications and additions transform that ordinary wheeled piece of wood into a rolling, flying, grinding machine that has caught on in popularity like wildfire. So, when trying to distinguish a world-class skateboard from a simple piece of wood with wheels, try to keep an eye out for some of these vital pieces:
Deck
This is the piece of wood that's more than a piece of wood. Skateboard decks usually are rectangular or oval in shape, and feature raised back-ends (sometimes called kick tails) and sloped front ends. And while yes, sometimes skateboard decks are made of wood, they can also be made from other materials such as plastic, fiberglass and even kevlar.
Grip Tape
Applied to the top surface of the skateboard deck like a sticker, grip tape is what keeps a skateboarder's feet from slipping and sliding all over the place while they're using the board. Grip tape has a tough, grinding feel to it, much like sandpaper does. While commonly seen in black, grip tape does indeed come in many different colors and styles.
Trucks
Skateboard trucks are attached directly to the underside of the skateboard deck. Somewhat shaped like a capital letter T, the wheels of the skateboard are connected to either end of the truck. There are two trucks per skateboard, and each truck holds two wheels, thus giving the skateboard four wheels in total. When thinking of a skateboard truck, try to picture the axles of an automobile.
Wheels
Without wheels, it would be very tricky, and very well near impossible, to actually move about on your skateboard deck. While skateboard wheels are commonly made from polyurethane, the actual size and diameter of the wheels can vary as well. There is no standard guidelines as to how big skateboard wheels can be, however, wheel sizes does depend on how you intend on using your skateboard.
Wheel Bearings
Without wheel bearings, the wheels which are attached to the board wouldn't turn much, if at all. Bearings for a skateboard usually are manufactured in the standard 608 bearing size and are usually made from steel. However, that being said, other compounds, like silicon nitrade, can also be found in skateboard wheel bearings.
Duke McCallister has one philosophy when it comes to Blind skateboards: and that's to go skate or go home! A skateboarding fan, Duke wants to share his experiences and passion for skateboards with expert boarders and those new to skateboarding. In addition to writing about skateboards, he also visits GoSkateorGoHome.com for all his boarding needs.
Whether talking about skateboard decks, trucks, Baker skateboards, grip tape or anything else about skateboarding, Duke is more than happy to talk about it, write about it and share stories about it!
And remember, if you want to check out a fantastic online destination for all your skateboarding needs, just roll on over to one of Duke's favorite sites at GoSkateorGoHome.com!
Article Source: http://EzineArticles.com/?expert=Duke_McCallister
By Duke McCallister
Upon a first or quick glance, a skateboard looks pretty simple and innocuous. In layman's terms, a skateboard deck is just a piece of wood with some wheels attached to its bottom. However, as with just about anything in life, upon closer inspection, you'll quickly discover that there's much more to a skateboard than meets the eye. Skateboards are, in fact, at the same time, complicated and delicate - which allows skateboarders the freedom to move about in any environment with precision, speed, toughness, and, when required, the ability to defy gravity and grind down rails. At the same time, expert riders and enthusiasts are also capable of performing incredible leaps, jumps and other mind-boggling tricks.
That's pretty impressive for something which, at its core, is just a piece of wood with wheels affixed to its underside. So, what makes a skateboard a skateboard? What goes into its construction and development which allows professional and high-level skateboarders the ability to propel, jump, turn, twist and do all those other super-cool things? And while a skateboard would be pretty much useless without someone activating and using it, the design of the actual deck, from its trucks to its grip tape and everything in between, also has something to do with it too.
With that being said, there are certain elements and aspects which are nothing but absolutely critical to a skateboard. Without these components, a skateboard would literally be - as has been mentioned previously - just a piece of wood with wheels stuck to it. However, certain modifications and additions transform that ordinary wheeled piece of wood into a rolling, flying, grinding machine that has caught on in popularity like wildfire. So, when trying to distinguish a world-class skateboard from a simple piece of wood with wheels, try to keep an eye out for some of these vital pieces:
Deck
This is the piece of wood that's more than a piece of wood. Skateboard decks usually are rectangular or oval in shape, and feature raised back-ends (sometimes called kick tails) and sloped front ends. And while yes, sometimes skateboard decks are made of wood, they can also be made from other materials such as plastic, fiberglass and even kevlar.
Grip Tape
Applied to the top surface of the skateboard deck like a sticker, grip tape is what keeps a skateboarder's feet from slipping and sliding all over the place while they're using the board. Grip tape has a tough, grinding feel to it, much like sandpaper does. While commonly seen in black, grip tape does indeed come in many different colors and styles.
Trucks
Skateboard trucks are attached directly to the underside of the skateboard deck. Somewhat shaped like a capital letter T, the wheels of the skateboard are connected to either end of the truck. There are two trucks per skateboard, and each truck holds two wheels, thus giving the skateboard four wheels in total. When thinking of a skateboard truck, try to picture the axles of an automobile.
Wheels
Without wheels, it would be very tricky, and very well near impossible, to actually move about on your skateboard deck. While skateboard wheels are commonly made from polyurethane, the actual size and diameter of the wheels can vary as well. There is no standard guidelines as to how big skateboard wheels can be, however, wheel sizes does depend on how you intend on using your skateboard.
Wheel Bearings
Without wheel bearings, the wheels which are attached to the board wouldn't turn much, if at all. Bearings for a skateboard usually are manufactured in the standard 608 bearing size and are usually made from steel. However, that being said, other compounds, like silicon nitrade, can also be found in skateboard wheel bearings.
Duke McCallister has one philosophy when it comes to Blind skateboards: and that's to go skate or go home! A skateboarding fan, Duke wants to share his experiences and passion for skateboards with expert boarders and those new to skateboarding. In addition to writing about skateboards, he also visits GoSkateorGoHome.com for all his boarding needs.
Whether talking about skateboard decks, trucks, Baker skateboards, grip tape or anything else about skateboarding, Duke is more than happy to talk about it, write about it and share stories about it!
And remember, if you want to check out a fantastic online destination for all your skateboarding needs, just roll on over to one of Duke's favorite sites at GoSkateorGoHome.com!
Article Source: http://EzineArticles.com/?expert=Duke_McCallister
Three of the Greatest Skateboarders in History
Three of the Greatest Skateboarders in History
By Duke McCallister
Just as hockey, Hollywood and traditional mainstream sports has its heroes and legends, so does skateboarding. Over many years, skateboarding has moved from a fringe activity into an accepted corner of mainstream life and culture. The reason for this amazing transition is because of the dedicated and talented boarders who have mastered and performed brilliant tricks and dazzling displays throughout time. However, there are a few skateboarders who have literally transcended skateboarding and are just as popular, well-known and as respected in the half-pipe as they are in the boardroom or on the red carpet.
With that in mind, below is a list of skateboarders who are more than just skateboarders. It could have been for their pursuits on their decks, or perhaps they had the foresight to view skateboarding as a platform to bigger and better things. But, for one reason or another, the people featured in this article have moved beyond the skateboarding world and are immensely respected outside of it, while maintaining their credibility within it as well.
i - Tony Hawk
First of all, is there not a better name for a skateboarder than Tony Hawk? Probably the most popular skateboarder to ever grace a deck, Tony Hawk is a rare combination of athlete, businessman and showman. As a pure skateboarder, he was the first person to ever complete a 900 degree rotation while in mid-air - often considered the holy grail of skateboarding tricks. As a performer, his stunts, tricks and displays have wowed crowds both young and old from all corners of the globe. And as an captain of industry, his name and image can be found on skateboarding products, video games, films and much more. A true multi-media mogul who got his start on a skateboard, Tony Hawk was - and still is - a talented visionary who broke skateboarding into mainstream culture.
ii - Rodney Mullen
Nicknamed "the Mutt", Rodney Mullen is often considered one of the forefathers of street skateboarding, in which an urban environment serves as both an artistic canvas and a physical challenge too. If you've ever heard of a skateboarding move called "the Ollie", it was Rodney Mullen who is credited with its invention. An old-school skater from the 1970s, Rodney Mullen is still going strong today, performing and developing new skateboarding decks and equipment. When talking about Rodney Mullen, it is often said that he's forgotten more tricks than he's invented - which is high praise considering he's created over 20 skateboarding tricks on his own.
iii - Robert "Bob" Burnquist
Born in Brazil, Bob Burnquist began skateboarding when he was eleven years old and became a professional skateboarder at the unreal age of fifteen. Perhaps Bob's greatest achievement came at the 2001 X-Games. He was sitting in second place, and he needed to perform a flawless skateboard run in order to have any chance of winning. Not only did he execute perfectly, but he amazed the crowd in attendance with an array of new and innovative tricks. These moves were so extraordinary that they didn't even have names attached to them. As a result, he scored the highest marks ever in the X-Games, thus winning the competition.
Duke McCallister has one philosophy when it comes to skateboards: and that's to go skate or go home! A skateboarding fan, Duke wants to share his experiences and passion for skateboards with expert boarders and those new to skateboarding. In addition to writing about skateboards, he also visits GoSkateorGoHome.com for all his boarding needs.Whether talking about skateboard decks, trucks, longboards, grip tape or anything else about skateboarding, Duke is more than happy to talk about it, write about it and share stories about it!And remember, if you want to check out a fantastic online destination for all your skateboarding needs, just roll on over to one of Duke's favorite sites at GoSkateorGoHome.com!
Article Source: http://EzineArticles.com/?expert=Duke_McCallister
By Duke McCallister
Just as hockey, Hollywood and traditional mainstream sports has its heroes and legends, so does skateboarding. Over many years, skateboarding has moved from a fringe activity into an accepted corner of mainstream life and culture. The reason for this amazing transition is because of the dedicated and talented boarders who have mastered and performed brilliant tricks and dazzling displays throughout time. However, there are a few skateboarders who have literally transcended skateboarding and are just as popular, well-known and as respected in the half-pipe as they are in the boardroom or on the red carpet.
With that in mind, below is a list of skateboarders who are more than just skateboarders. It could have been for their pursuits on their decks, or perhaps they had the foresight to view skateboarding as a platform to bigger and better things. But, for one reason or another, the people featured in this article have moved beyond the skateboarding world and are immensely respected outside of it, while maintaining their credibility within it as well.
i - Tony Hawk
First of all, is there not a better name for a skateboarder than Tony Hawk? Probably the most popular skateboarder to ever grace a deck, Tony Hawk is a rare combination of athlete, businessman and showman. As a pure skateboarder, he was the first person to ever complete a 900 degree rotation while in mid-air - often considered the holy grail of skateboarding tricks. As a performer, his stunts, tricks and displays have wowed crowds both young and old from all corners of the globe. And as an captain of industry, his name and image can be found on skateboarding products, video games, films and much more. A true multi-media mogul who got his start on a skateboard, Tony Hawk was - and still is - a talented visionary who broke skateboarding into mainstream culture.
ii - Rodney Mullen
Nicknamed "the Mutt", Rodney Mullen is often considered one of the forefathers of street skateboarding, in which an urban environment serves as both an artistic canvas and a physical challenge too. If you've ever heard of a skateboarding move called "the Ollie", it was Rodney Mullen who is credited with its invention. An old-school skater from the 1970s, Rodney Mullen is still going strong today, performing and developing new skateboarding decks and equipment. When talking about Rodney Mullen, it is often said that he's forgotten more tricks than he's invented - which is high praise considering he's created over 20 skateboarding tricks on his own.
iii - Robert "Bob" Burnquist
Born in Brazil, Bob Burnquist began skateboarding when he was eleven years old and became a professional skateboarder at the unreal age of fifteen. Perhaps Bob's greatest achievement came at the 2001 X-Games. He was sitting in second place, and he needed to perform a flawless skateboard run in order to have any chance of winning. Not only did he execute perfectly, but he amazed the crowd in attendance with an array of new and innovative tricks. These moves were so extraordinary that they didn't even have names attached to them. As a result, he scored the highest marks ever in the X-Games, thus winning the competition.
Duke McCallister has one philosophy when it comes to skateboards: and that's to go skate or go home! A skateboarding fan, Duke wants to share his experiences and passion for skateboards with expert boarders and those new to skateboarding. In addition to writing about skateboards, he also visits GoSkateorGoHome.com for all his boarding needs.Whether talking about skateboard decks, trucks, longboards, grip tape or anything else about skateboarding, Duke is more than happy to talk about it, write about it and share stories about it!And remember, if you want to check out a fantastic online destination for all your skateboarding needs, just roll on over to one of Duke's favorite sites at GoSkateorGoHome.com!
Article Source: http://EzineArticles.com/?expert=Duke_McCallister
Subscribe to:
Posts (Atom)