More Advanced Skateboard Tricks
By James R Shaw
So you have mastered all the basic skateboard tricks like: the ollie, kickturns, 50/50 grinds, rock n rolls, board slides, truck stands, manuals and maybe even the kickflip (which could be considered an intermediate trick). Are you ready to kick it up a notch and start learning some serious skateboard tricks? Read on to learn the basics of: ollie on a ramp, rock to fakie, heelflip and indy grab.
Ollie on a Ramp. This should actually be called "ollie off a ramp". If you know how to ollie on the ground, great. Now you're going to ollie while flying off a ramp. This is fun, but dangerous when attempting to ollie off a huge ramp. Start with a mini ramp first. To ollie on a ramp:
1. Skate towards the ramp and pickup as much speed as possible.
2. Make sure your feet are in ollie position.
3. Lean back a little while riding up the ramp.
4. When the nose of the board gets to the edge, push the tail down quickly and pull your front knee up.
5. Ollie and try to land safely.
Rock to Fakie. You'll need a quarterpipe, halfpipe or mini ramp to do a rock to fakie. The rock to fakie is when a skater rides up the ramp right to the very edge, balances on the middle of the board, rocks a little bit, and then goes back the direction they came. To rock to fakie:
1. Skate towards the ramp and pickup some speed.
2. Your front foot should be on the nose and your back foot on the tail.
3. Hit the top of the ramp and push your front foot forward so that the front of the board dips forward.
4. You should balance and hold this move for a few seconds.
5. Drop down and go back the same direction you came up.
Heelflip. The heelflip is closely related to the kickflip, so this is probably the trick to learn after mastering kickflips. A heelflip is when a skater ollies into the air and flips the skateboard so that it rotates once (parallel to the ground) then lands on the skateboard in the same position he/she started in. To heelflip:
1. You should place your feet the same way you would for an ollie.
2. Your back foot should be on the tail.
3. Your front foot is towards the center of the board (hang your toes over the edge a bit).
4. Now Ollie and kick your back heel forward.
Indy Grab. The Indy Grab is considered a "grab" trick, hence the name. It can be performed on a skateboard as well as a snowboard. You'll mostly see this trick performed on a ramp. Before learning the indy grab, I recommend you master the ollie on a ramp first. To indy grab:
1. Drop down the ramp and start picking up speed.
2. Place your back foot on the back of your board (the tail).
3. Your front foot should be on your front trucks.
4. Ride towards the ramp and Ollie off the top as high as possible.
5. While you're up there, reach down and grab your board between your feet with your back hand.
6. Bend your knees deep to make this easier.
7. Try to hold the grab as long as you can, but don't forget that you have to land safely!
Make sure you've mastered basic skateboard tricks before attempting more difficult tricks. As silly as it sounds, safety should always come first. You should wear a helmet and all padding while skating, especially when trying new tricks - wipeouts are almost guaranteed to happen until you get the trick right!
Display your skateboards and keep them off the floor with Jimmy Racks original steel skateboard racks - holds 3 skateboards and can be installed on your wall in under 4 minutes!
Article Source: http://EzineArticles.com/?expert=James_R_Shaw
Longboard Wheel Guide - Understanding Your Longboard
Longboard Wheel Guide - Understanding Your Longboard
By Ilse Hagen
If you've got yourself a longboard, then you must be one of many enthusiasts who take to the streets to cruise for a ride. But this activity is not always about having fun. You also need to ensure that your longboard is properly taken care of to make sure that you've always got a ride when you need one. Need to change your longboard wheels? Here's a longboard wheel guide you can use.
The basics
Longboard wheels are designed for use in cruising and transport, ranging in size but available between 65 to 100 millimeters. Since they are bigger than other skateboard wheels, they are more stable and provide the user with a more comfortable ride. Because solid polyurethane combined with their size would make the wheels thick and heavy, hard plastic cores are usually used instead.
The issue of hardness and softness: a longboard wheel guide
Longboard wheels, as well as other skateboard wheels, can come in varying degrees of hardness, measured using the durometer A scale. The softest kind of wheels are rated at 75a, while the hardest are there on top with ratings of 99a. For those beyond the durometer A scale, it might be better to rely on the B or D scales, which have more accuracy and cover a wider range of hardness types.
Choosing your wheel: a quick tip
Wheel size is not just about finding something that fits your skateboard. Rather, you also need to factor in your own body size. The smaller you are, then the smaller your wheels will be. As for a longboard wheel guide, bigger folk actually have the advantage of using longboards since the wheels needed by a longboard are bigger, with sizes between 65 to 100 millimeters. This means that there won't be much need to go looking for the right wheels when you're big person using a longboard.
Important information
A complete longboard wheel guide is available at PickyGuide, the authority in free consumer advice. Access top-ranked, best-reviewed, and most competitively priced longboard wheels in PickyGuide's recommended products section.
Article Source: http://EzineArticles.com/?expert=Ilse_Hagen
By Ilse Hagen
If you've got yourself a longboard, then you must be one of many enthusiasts who take to the streets to cruise for a ride. But this activity is not always about having fun. You also need to ensure that your longboard is properly taken care of to make sure that you've always got a ride when you need one. Need to change your longboard wheels? Here's a longboard wheel guide you can use.
The basics
Longboard wheels are designed for use in cruising and transport, ranging in size but available between 65 to 100 millimeters. Since they are bigger than other skateboard wheels, they are more stable and provide the user with a more comfortable ride. Because solid polyurethane combined with their size would make the wheels thick and heavy, hard plastic cores are usually used instead.
The issue of hardness and softness: a longboard wheel guide
Longboard wheels, as well as other skateboard wheels, can come in varying degrees of hardness, measured using the durometer A scale. The softest kind of wheels are rated at 75a, while the hardest are there on top with ratings of 99a. For those beyond the durometer A scale, it might be better to rely on the B or D scales, which have more accuracy and cover a wider range of hardness types.
Choosing your wheel: a quick tip
Wheel size is not just about finding something that fits your skateboard. Rather, you also need to factor in your own body size. The smaller you are, then the smaller your wheels will be. As for a longboard wheel guide, bigger folk actually have the advantage of using longboards since the wheels needed by a longboard are bigger, with sizes between 65 to 100 millimeters. This means that there won't be much need to go looking for the right wheels when you're big person using a longboard.
Important information
A complete longboard wheel guide is available at PickyGuide, the authority in free consumer advice. Access top-ranked, best-reviewed, and most competitively priced longboard wheels in PickyGuide's recommended products section.
Article Source: http://EzineArticles.com/?expert=Ilse_Hagen
Understanding Lowrider Longboards - Finding the Right Longboards For You
Understanding Lowrider Longboards - Finding the Right Longboards For You
By Ilse Hagen
Longboards are essentially skateboards but are wider and longer, used for transportation purposes and for slalom, exhibition, and competitive riding. Typically, a longboard is made up of a deck, a set of wheels, bearings, and trucks in varying sizes depending on the kind of riding to be done. They may also be made from synthetic materials like carbon fiber and fiberglass or natural woods like maple or birch.
Kinds of longboards to choose from
Pintail longboards are best for general transportation, flatland cruising, and downhill bombing. They are very narrow skateboards at just about nine inches in width and extending up to 48 inches in length. Along with trucks installed at the farther ends of each side, they also have semi-slanted riser pads, allowing the rider to make deeper turns. However, because of this, beginners might find that pintail longboards may be difficult to maneuver. Lowrider longboards, on the other hand, are best meant for street riding. With decks made from durable laminated wood, lowrider longboards also have low profiles ideal for pushing and carving. Lowrider longboards also have trucks installed nearly at the tips to achieve better control and stability.
Choosing longboards: some tips
If you're more of a recreational rider, go for decks made from natural wood. They are inexpensive yet strong enough to handle the beating that accompanies general transportation. If you're more of a competitive rider, look for decks made from synthetic materials for more durability, since competitive riding is more punishing than recreational riding.
Longboards with stiff bushing is ideal for downhill bombing or adventure riding since they offer stability at high speeds. Softer bushing offers more control so they're more suited for general transportation.
General recreational riding calls for steel ball bearings, while downhill skating benefits from ceramic ball bearings because they lessen thermal resistance and friction. Ceramic ball bearings, though, are more expensive.
Important information
Complete information on lowrider longboards is available at PickyGuide, the authority in free consumer advice. Access top-ranked, best-reviewed, and most competitively priced longboards in PickyGuide's recommended products section.
Article Source: http://EzineArticles.com/?expert=Ilse_Hagen
By Ilse Hagen
Longboards are essentially skateboards but are wider and longer, used for transportation purposes and for slalom, exhibition, and competitive riding. Typically, a longboard is made up of a deck, a set of wheels, bearings, and trucks in varying sizes depending on the kind of riding to be done. They may also be made from synthetic materials like carbon fiber and fiberglass or natural woods like maple or birch.
Kinds of longboards to choose from
Pintail longboards are best for general transportation, flatland cruising, and downhill bombing. They are very narrow skateboards at just about nine inches in width and extending up to 48 inches in length. Along with trucks installed at the farther ends of each side, they also have semi-slanted riser pads, allowing the rider to make deeper turns. However, because of this, beginners might find that pintail longboards may be difficult to maneuver. Lowrider longboards, on the other hand, are best meant for street riding. With decks made from durable laminated wood, lowrider longboards also have low profiles ideal for pushing and carving. Lowrider longboards also have trucks installed nearly at the tips to achieve better control and stability.
Choosing longboards: some tips
If you're more of a recreational rider, go for decks made from natural wood. They are inexpensive yet strong enough to handle the beating that accompanies general transportation. If you're more of a competitive rider, look for decks made from synthetic materials for more durability, since competitive riding is more punishing than recreational riding.
Longboards with stiff bushing is ideal for downhill bombing or adventure riding since they offer stability at high speeds. Softer bushing offers more control so they're more suited for general transportation.
General recreational riding calls for steel ball bearings, while downhill skating benefits from ceramic ball bearings because they lessen thermal resistance and friction. Ceramic ball bearings, though, are more expensive.
Important information
Complete information on lowrider longboards is available at PickyGuide, the authority in free consumer advice. Access top-ranked, best-reviewed, and most competitively priced longboards in PickyGuide's recommended products section.
Article Source: http://EzineArticles.com/?expert=Ilse_Hagen
Skateboarding Tips - How to Nollie
Skateboarding Tips - How to Nollie
By Geoff Wheeler
Another one of my favorite skateboarding tricks, the nollie can give you a nice variation base for a lot of other tricks. You can switch up most street tricks by doing them "Nollie" first. Kick flips, heel flips and even varial tricks like a 360 flip can be done with a Nollie twist.
What's a Nollie? Well its just like a ollie but reversed...off the nose of your board instead of the tail. Myself, I've always found this to be the easiest skateboarding trick....even more then the simple ollie!...so have no fear. With a little practice and these few simple tips to follow you will master this trick in no time at all.
So if you want to start pulling off 360 nollie flips down a set of seven stairs, this would be a good place to start.
Pop And Slide So, with this trick it's really easy to get a great "pop" off your nose for awesome height and style when doing a nollie. Begin with your back foot almost 1/2 the way up your board. Have your front foot pointed at an angle and right on the front of the nose.
Lift Off! Now that you have your feet in the right position use the ball of your front foot to pop the nose off the ground. Try to completely lift your front foot off the nose of the board. So in essence you should look and feel like you're doing a one foot ollie. If we were to pause this in mid air your front foot would be totally off the board and kicking forward in the air.
Now Lean Back... All thats left to do is to slide the back foot up to the tail or end of your board and lean back...alot!...this is one of the few tricks where you wont easily mess up by leaning back. In fact it will really help.
So to wrap the Nollie...get some speed, place your feet correctly, pop the nose and lift/kick your front foot off into the air, lean back and slide your foot, land and roll away clean.
Best of luck learning this awesome skate trick.
Happy Skateboarding.
Geoff Wheeler has been involved in skateboarding for the past 20 years and writes about skate shoes including Ipath skate shoes
Article Source: http://EzineArticles.com/?expert=Geoff_Wheeler
Skateboarding - How to Heel Flip
Skateboarding - How to Heel Flip
By Geoff Wheeler
OK, so you have ollies and kick flips down solid it's now time to progress on to something a bit more challenging. The Heel flip. Here's how you do one: Pop your tail, kick your foot out, catch it and ride away...yeah right. Unfortunately this is how most Heel flip tips out there go. Not here. Here I'm going to break it down and give you in depth tips on how to pull this trick off correctly and with style. Ready?...here we go.
Moment of Zen before you try any new skateboarding trick I have always found its a great idea to visualize it clearly in your mind how the trick will look. Do this before you do the heel flip and even during it. Maybe imagine a heel flip from one of your favorite skate videos or one of your favorite pros pulling it off. This visualization really really works. So much like a kick flip uses the toe and kicks off at a slightly less then 180 degree angle, the heel flip is the same but you use your heel and you are kicking in the opposite direction. Do not kick straight out to the side and do not kick right out in front...make it in between the two. Get rolling with a little speed and give your board a good pop. When kicking your front foot out make sure to twist your foot and ankle to the side a bit...similar to how you slide your foot up the board somewhat sideways for an ollie the same is done for a heel flip. Only you kick out at an angle and completely off the board.
Airwalk it! Most people are paying so much attention to what their front foot is doing during this tricks they pretty much don't think about the back. Well here's another tried and true secret I've found when doing these. Kick your back foot out the opposite direction to the front foot. So essentially you are doing almost a scissor kick in the air or an "airwalk" visualize your legs doing this as you begin to kick. Don't just jump straight up and kick...that wont do it. You need to kick your back leg somewhat in the opposite direction.You don't have to over do it or kick out big time like with the front foot...just a little movement with the back foot will do it.This method has always worked for me and keeps my heel flips looking big, clean and stylish.
Ride away clean Catch your board in the air and land solid. OK the ending sounds too simple but, if you follow the above tips it is that simple.
In conclusion be sure to think about how awesome the trick will look in your mind and really see yourself pulling it off. Slide your front foot off the board at an angle while popping off the ground and kick your back foot in the opposite direction slightly.
I hope this helps you and happy skating!
Geoff Wheeler has been involved in skateboarding for the past 20 years and writes about skate shoes including Ipath skate shoes and Globe shoes.
Article Source: http://EzineArticles.com/?expert=Geoff_Wheeler
Subscribe to:
Posts (Atom)